Air to Water with Tank
 Model No: |
100L – 500L |
 Output/Power: |
1500W |
 Height: |
5 – 15 Meters |
 Heat Pump: |
90W-230W |
- Introduction
- Features
- Contact Us Now
Heat Recovery Ventilation Air to Water with Tank
Ventilation system with heat recovery via a heat pump is combined with domestic hot water and radiator water heating.
Recover the wasted energy from the exhaust air, to heat the water. Heated water inside the tank can be supplied to house heating system and sanitary hot water by a stainless steel heat exchanger.
And some connectors on the water tank for other heating sources : boiler, solar panel, existing heat pump.
Operation function: ventilation, house heating, sanitary hot water, solar heating.
Installation Types:
Waste heat is useful:
Install in places enable direct connection of a heat generator: garages, washing room or boiler rooms.
Dehumidifying in recirculating air operation:
dehumidifying air in laundry rooms can be used to dry laundry and prevents damage caused by humidity.
Cooling in recirculating air operation:
indoor air is drawn out from storage room or wine cellars, for example, via an air duct and is then cooled and dehumidified in the hot water heat pump and blown into the room again. Suitable locations for installation include hobby rooms, furnace rooms and laundry rooms. The air ducting in the heated section of the system should be insulated with water-proof insulation to prevent the formation of condensate.
Heat recovery from return air. Removal of used, humid, charged air from bath, toilet, kitchen. Fresh air enter home by slots.
|
Model
|
KP-30N
|
|
|
Rated heating capacity
|
KW
|
3.0
|
|
Water volume
|
L
|
280
|
|
Power input(heating)
|
W
|
860
|
|
Operating corrent
|
A
|
4
|
|
power supply
|
V/Ph/Hz
|
220/1/50
|
|
Compressor quantity
|
1
|
|
|
Compressor type
|
Rotary
|
|
|
Airflow direction
|
2-duct.Top discharge
|
|
|
Return temperature
|
℃
|
10℃~50℃ adjustable
|
|
Airflow
|
m3/h
|
450/350
|
|
Air pressure
|
pa
|
60
|
|
Duct dimension
|
mm
|
φ150
|
|
Noise level
|
dB(A)
|
55
|
|
Inlet/outlet water pipe connector
|
DN20
|
|
|
Input power (Electric heating)
|
mm
|
1.5
|
|
Net dimension(D×H)
|
kw
|
φ700 x 1835
|
|
Packing dimension(L×W×H)
|
mm
|
780/780/2000
|
|
Net weight
|
kg
|
105
|
|
Gross weight
|
kg
|
110
|
- 1)optional:
- *coil for solar panel
- *house heating, coil for sanitary hot water
Full Installation Support
