Street Sign Pole

Introduction to Street Sign Poles:
Street sign poles are typically made of durable materials such as steel, aluminum, or fiberglass to withstand harsh weather conditions, vandalism, and vehicular impacts. They are designed to securely hold traffic signs in place and ensure visibility to motorists and pedestrians. Street sign poles come in various shapes, sizes, and configurations to accommodate different types of signs and installation requirements.

Street Sign Pole is also known as traffic sign pole, highway sign pole, both sides of the highway used to indicate the traffic line of the column, traffic sign pole is processed by steel pipe, the surface after hot dip galvanized treatment.

Features of Street Sign Poles:
Material: Street sign poles are commonly made of steel, aluminum, or fiberglass, each offering specific advantages in terms of strength, durability, and corrosion resistance.

Height and Configuration: Street sign poles come in various heights and configurations to accommodate different types of signs, road conditions, and installation requirements, including single or multiple sign installations, cantilevered arms, and cross-bracing for additional support.

Reflectivity: Many street sign poles are equipped with reflective materials or coatings to enhance visibility at night or in low-light conditions, improving safety and visibility for motorists and pedestrians.

Mounting Options: Street sign poles can be mounted using various methods, including direct burial, surface mounting, or baseplate mounting, depending on the location, soil conditions, and installation preference

Classification of marker posts
Traffic signs generally have single – column traffic signs, multi – column traffic signs.
The inside edge of the column sign shall not invade the building limit of the road, generally not less than 25cm from the outside edge of the roadway or sidewalk or the shoulder of the dirt road
The height of the lower edge of the traffic sign board from the road surface is divided into: the expressway shall be no less than 5500mm, and the national highway and provincial highway shall be no less than 5000mm.In urban roads with a large proportion of small cars, the height from the lower edge to the ground can be effective according to the actual situation, but should not be less than 120cm.
If the setting is on the side of the road with pedestrians and non-motor vehicles, the setting height shall be greater than 180cm.

Single column traffic sign pole
Single-column traffic sign pole is a sign board mounted on a column, suitable for medium and small size alarm,notices, injunctions, signs of direction and small signs of direction.

Multi-column traffic sign pole
Multi-column traffic sign pole is a sign board mounted on two or more columns and is suitable for rectangular indication or direction sign.

Arm type traffic sign pole
Cantilever traffic sign pole — F traffic sign pole, T traffic sign pole. The cantilever traffic sign pole is the sign plate mounted on the cantilever, and the height of the lower edge of the sign from the ground should be higher than the clearance height specified by the road.

Portal frame traffic sign traffic gantry
The gantry traffic sign is installed on the gantry, and the lower edge of the sign should be higher than the clearance height stipulated by the road.
Door-type traffic sign posts are applicable to the following situations:
1. Multi-lane roads (leading to more than three lanes) shall indicate the direction of each lane;
2. Large traffic volume, large vehicles in the outer lane block the sight of small vehicles in the inner lane;
3. The traffic should stay in the interleaving, diverging and river sections at a high speed, such as: interconnecting three-dimensional crossing to build a closer place with dense signs, interconnecting three-dimensional crossing main line area where the highway intersects with the highway;

Application Scenarios:

1. Roadways and Highways: Street sign poles are commonly used on roads and highways to provide directional guidance, regulatory information, and warnings to motorists, cyclists, and pedestrians.

2. Urban Streets: These poles are installed on urban streets and intersections to regulate traffic flow, designate parking zones, and provide essential information to drivers and pedestrians.

3. School Zones: Street sign poles are often installed near schools to alert drivers to reduced speed limits, crosswalks, and other safety measures to protect children and school staff.

4. Construction Zones: In construction zones, street sign poles are used to warn motorists of potential hazards, lane closures, detours, and other temporary traffic changes to ensure safety and minimize disruptions.

5. Parking Lots: Street sign poles are installed in parking lots to designate parking spaces, indicate traffic flow, and provide directional guidance to drivers, improving safety and efficiency in parking facilities.

The main materials
S235, S355, etc. The length is between 1.5m — 12M.