600kW Natural Gas Generator Set
 Model |
ECO-600KW |
 Rated power(kW): |
600kw |
 Rated current(A) |
1083 |
 Rated voltage(V) |
400 V |
- Description
- Technical Parameters
- Contact Us Now
Description
| Model | Dimension (mm) L×B×H | Net Weight (kg) | Instruction |
| 600GF1-RT | 5433×1970×2700 | 11400 | This is a common type of natural gas generator set designed with open cooling method foe heat exchanger. |
| 600GF1-PwT | 5433×1970×2700 | 10900 | This is a common type of natural gas generator set designed with the closed cooling method for horizontal water box with more than one fan. |
| 600GF1-PT | 5925×1970×2700 | 12080 | This is a common type of natural gas generator set designed with closed cooling method for vertical water box with fan. |
| 600GFZ1-RT | 5433×1970×2700 | 11400 | This is an automatic type of natural gas generator set designed with ESM3 control system and open cooling method for heat exchanger. |
| 600GFZ1-PwT | 5433×1970×2700 | 10900 | This is an automatic type of natural gas generator set designed with ESM3 control system and closed cooling method for horizontal water box with more than one fan. |
| 600GFZ1-PT | 5925×1970×2700 | 12080 | This is an automatic type of natural gas generator set designed with ESM3 control system and closed cooling method for vertical water box with fan. |
| 600GJZ1-PwT | 9014×3000×2900 | 20000 | This is an automatic mobile power station which looks like a container. It is designed with ESM3 control system, close cooling method for horizontal water box with more than one fan and container-shaped set. |
Conditions for Using
1. For pressurized natural gas generator in this natural gas generator set, the pressure for air inflow is 100 kPa~300 kPa; for unpressurized natural gas generator, the pressure for air inflow is 30 kPa~300 kPa.
2. If the distance between the natural gas and the pressure regulating valve for air inflow is 1m or nearer, the temperature of the natural gas should not surpass 40℃.
3. The content of the methane in natural gas for this natural gas generator set should not be lower than 70% and the low heating value is 32 MJ/Nm3~45 MJ/Nm3.
4. The content of H2S should not surpass 20 mg/Nm3 and the total content of sulfur should not surpass 480 mg/Nm3.
5. The granularity of the impurity should not surpass 5μm and the content of the impurity should not surpass 30 mg/Nm3. There should not be any free water, clean oil, etc.
Technologies Used
Technologies that this natural gas generator set uses include electrical fuel gas mixing technology, low-pressure air inflow technology, automatic control technology for burning and safe conveying system.
Technical Specifications
| Name of Parameter | Value of Parameter | ||
| Model of the set | 600GF1－RT/PwT/PT | 600GFZ1－RT/PwT/PT | 600GJZ1-PwT |
| Model of gas engine | T12V190ZL-2A | ||
| Model of generator | 1FC6 457-6LA42 | ||
| Rated power(kW) | 600 | ||
| Rated current(A) | 1083 | ||
| Rated voltage(V) | 400 | ||
| Rated frequency(Hz) | 50 | ||
| Rated rotated speed(r/min) | 1000 | ||
| Rated power factor(cosφ) | 0.8(lag) | ||
| The number of phase and the wiring method | Three coils wired by three phase lines or three coils wired by three phase lines and one zero line. | ||
| Way for adjusting pressure | Automatic adjusting pressure | ||
| Excitation method | Brushless excitation | ||
| Starting up method | 24VDC Electric starting system | ||
Technical Parameters
| Name of Parameter | Value of Parameter |
| Model | T12V190ZL-2A |
| Number of cylinder | 12 |
| Arranging way of cylinders | V shape with the included degree of 60° |
| Diameter of cylinder(mm) | 190 |
| Route(mm) | 210 |
| Total displacement(L) | 71.45 |
| Air inflow way | Increasing the pressure by using the exhaust produced by the generator to promote the operation of the turbine, thus improve the inlet pressure. The intercooler for air inflow is also used. |
| Rated power(kW) | 650 |
| Rated rotate speed(r/min) | 1000 |
| Min. stable rotate speed with empty load(r/min) | 600 |
| Dimension(L×B×H) (mm) | 2692×1560×2170 |
| Net weight(kg) | 5900 |
Founded in 1978, our factoryi is one of the leading natural gas generator set manufacturers and suppliers, based in China. We also provide oilfield diesel engine, biomass generator set, oil shale gas generator set, and more. Over the past years, we have always been striving to provide customers with high quality products and top class service. As a result, our company received the ISO9001:2008 certification and our products are CE, CCC certified. For more detailed information, please continue browsing our website or feel free to call us directly.
Full Installation Support
